Adding a real focal point to your living room a hole in the wall electric fire could prove to be the final piece of the puzzle in creating your dream interior.
By following these simple steps a qualified electrician should be able to install a hole in the wall electric fire in your home…
Your step by step guide
Before starting be sure to check the product manual. Different models may have specific installation instructions. The instructions below are intended as a general guide and are not exhaustive…
Step 1.
To start ensure the opening has been prepared and the power has been routed to the correct side of the recess.
Step 2.
Secure the side brackets to both sides of your hole in the wall electric fire using the screws provided.
Step 3.
Most models of electric fires come with a template to aid installation. Use the template and a pencil to determine and mark where the holes need to be drilled.
Step 4.
Lift the electric fire up to the opening and attach the electrical connection.
Step 5.
Slide the electric fire into place and secure it to the wall with the screws provided. Use a spirit level to ensure your hole in the wall electric fire is level.
Step 6.
Add the trim to the outside of the fire and add any pebbles if you’re installing a pebble model.
After Installing your Hole in the Wall Electric Fire
Once the electric fire is firmly in place check it is fully operational. Conduct a thorough inspection and ensure all required paperwork is complete.
Maintaining your electric fire
When cleaning or maintaining your electric fire ensure it is switched off and unplugged. Stainless steel units can be cleaned using a cloth and suitable cleaner. Other units should be cleaned with a damp cloth. The area around the fire should be kept clear of any animal hair or lint, as this could be drawn into the unit and may affect its performance.
By following these simple steps a qualified electrician should have no problems installing a hole in the wall electric fire. If you encounter any problems along the way then don’t hesitate to get in touch, we’re always on hand to offer expert advice and guidance.
